Tips on Saving Energy and Money at Home

Did you know that the average family spends close to $1300 a year on their home's utility bills? Unfortunately, a large portion of that energy is wasted. By using a few inexpensive energy efficient measures, you can reduce your energy bills by 10% to 50% and, at the same time, help reduce air pollution.

The key to achieving these savings is a whole-house energy efficiency plan. To take a whole-house approach, view your home as an energy system with interdependent parts. For example, your heating system is not just a furnace, it's a heat delivery system that starts at the furnace and delivers heat throughout your home using a network of ducts. You may have a top-of-the-line, energy efficient furnace, but if the ducts leak and are uninsulated, and your walls, attic, windows, and doors are un-insulated, your energy bills will remain high. Taking a whole-house approach to saving energy ensures that dollars you invest in energy efficiency are wisely spent.

This information shows you how easy it is to reduce your home energy use. It is a guide to easy, practical solutions for saving energy throughout your home, from the insulating system that surrounds it to the appliances and lights inside. These valuable tips will save you energy and money and, in many cases, help the environment by reducing pollution and conserving our natural resources.

The first step to taking a whole-house energy efficiency approach is to find out which parts of your house use the most energy. A home energy audit will show you where these are and suggest the most effective measures for reducing your energy costs. You can conduct a simple home energy audit yourself, you can contact your local utility, or you can call an independent energy auditor for a more comprehensive examination.

Energy Auditing Tips

• Check the level of insulation in your exterior and basement walls, ceilings, attic, floors, and crawl spaces.
• Check for holes or cracks around your walls, ceilings, windows, doors, light and plumbing fixtures, switches, and electrical outlets that can leak air into or out of your home.
• Check for open fireplace dampers.
• Make sure your appliances and heating and cooling systems are properly maintained.
• Study your family's lighting needs and use patterns, paying special attention to high-use areas such as the living room, kitchen, and exterior lighting. Look for ways to use daylight, reduce the time the lights are on, and replace incandescent bulbs and fixtures with compact fluorescent lamps or standard fluorescent lamps.

Formulating Your Plan

After you have identified places where your home is losing energy, assign priorities to your energy needs by asking yourself a few important questions:

How much money do you spend on energy?
Where are your greatest energy losses?
How long will it take for an investment in energy efficiency to pay for itself in energy savings?
Can you do the job yourself, or will you need to hire a contractor?
What is your budget and how much time do you have to spend on maintenance and repair?

Once you assign priorities to your energy needs, you can form a whole-house efficiency plan. Your plan will provide you with a strategy for making smart purchases and home improvements that maximize energy efficiency and save the most money.

Another option is to get the advice of a professional. Many utilities conduct energy audits for free or for a nominal charge. For a fee, a professional contractor will analyze how your home's energy systems work together as a system and compare the analysis against your utility bills. He or she will use a variety of equipment such as blower doors, infrared cameras, and surface thermometers to find inefficiencies that cannot be detected by a visual inspection. Finally, they will give you a list of recommendations for cost effective energy improvements and enhanced comfort and safety.

Insulation

Checking your home's insulating system is one of the fastest and most cost efficient ways to use a whole-house approach to reduce energy waste and maximize your energy dollars. A good insulating system includes a combination of products and construction techniques that provide a home with thermal performance, protect it against air infiltration, and control moisture. You can increase the comfort of your home while reducing your heating and cooling needs by up to 30% by investing just a few hundred dollars in proper insulation and weatherization products.

Insulation Tips

• Consider factors such as your climate, building design, and budget when selecting insulation R-value for your home.
• Use higher density insulation, such as rigid foam boards, in cathedral ceilings and on exterior walls.
• Ventilation plays a large role in providing moisture control and reducing summer cooling bills. Install attic vents to help make sure that there is one inch of ventilation space between the insulation and roof shingles. Attic vents can be installed along the entire ceiling cavity to help ensure proper airflow from the soffit to the attic, helping to make a home more comfortable and energy efficient.
• Do not block vents with insulation, and keep insulation at least 3 inches away from recessed lighting fixtures or other heat producing equipment unless it is marked "I.C." - designed for direct insulation contact.
• The easiest and most cost effective way to insulate your home is to add insulation in the attic. To find out if you have enough attic insulation, measure the thickness of insulation. If there is less than R-19 (6 inches of fiber glass or rock wool or 5 inches of cellulose) you could probably benefit by adding more. Most homes should have between R-19 and R-49 insulation in the attic.
• If your attic has ample insulation and your home still feels drafty and cold in the winter or too warm in the summer, chances are you need to add insulation to the exterior walls as well. This is a more expensive measure that usually requires a contractor, but it may be worth the cost if you live in a very hot or cold climate.

Weatherization

Warm air leaking into your home during the summer and out of your home during the winter can waste a substantial portion of your energy dollars. One of the quickest dollar-saving tasks you can do is caulk, seal, and weather strip all seams, cracks, and openings to the outside. You can save 10% or more on your energy bill by reducing the air leaks in your home.

Sources of Air Leaks in Your Home

Heating and Cooling

Heating and cooling your home uses more energy and drains more energy dollars than any other system in your home. No matter what kind of heating, ventilation, and air conditioning system you have in your house, you can save money and increase comfort by properly maintaining and upgrading your equipment. By combining proper equipment maintenance and upgrades with appropriate insulation, weatherization, and thermostat settings, you can cut your energy bills and your pollution output in half.

Heating Tips

• Set your thermostat as low as is comfortable.
• Clean or replace filters on furnaces once a month or as needed.
• Clean warm air registers, baseboard heaters, and radiators as needed; make sure they're not blocked by furniture, carpeting, or drapes.
• Bleed trapped air from hot water radiators once or twice a season; if in doubt about how to perform this task, call a professional.
• Place heat resistant radiator reflectors between exterior walls and the radiators.
• Use kitchen, bath, and other ventilating fans wisely; in just 1 hour, these fans can pull out a houseful of warmed or cooled air. Turn fans off as soon as they have done the job.
• Keep draperies and shades open on south facing windows during the heating season to allow sunlight to enter your home; close them at night to reduce the chill you may feel from cold windows.
• Close an unoccupied room that is isolated from the rest of the house, such as in a corner, and turn down the thermostat or turn off the heating for that room or zone. However, do not turn the heating off if it adversely affects the rest of your system. For example, if you heat your house with a heat pump, do not close the vents - closing the vents could harm the heat pump.
• Select energy efficient equipment when you buy new heating equipment. Your contractor should be able to give you energy fact sheets for different types, models, and designs to help you compare energy usage.

Heat Pumps

Heat pumps are the most efficient form of electric heating in moderate climates, providing three times more heating than the equivalent amount of energy they consume in electricity. There are three types of heat pumps: air-to-air, water source, and ground source. They collect heat from the air, water, or ground outside your home and concentrate it for use inside. Heat pumps do double duty as a central air conditioner. They can also cool your home by collecting the heat inside your house and effectively pumping it outside. A heat pump can trim the amount of electricity you use for heating as much as 30% to 40%.

Heat Pump Tips

• Do not set back the heat pump's thermostat manually if it causes the electric resistance heating to come on. This type of heating, which is often used as a backup to the heat pump, is more expensive.
• Clean or change filters once a month or as needed, and maintain the system according to manufacturer's instructions.

Solar Heating

Using the sun to heat your home through passive solar design can be both environmentally friendly and cost effective. In many cases, you can cut your heating costs by more than 50% compared to the cost of heating the same house that does not include passive solar design. Passive solar design techniques include placing larger, insulated windows on south facing walls and locating thermal mass, such as a concrete slab floor or a heat absorbing wall, close to the windows. However, a passive solar house requires careful design, best done by an architect for new construction or major remodeling.

Solar Tips

• Keep all south facing glass clean.
• Make sure that objects do not block the sunlight shining on concrete slab floors or heat-absorbing walls.
• Consider using insulating curtains to reduce excessive heat loss from large windows at night.

Fireplaces

When you cozy up next to a crackling fire on a cold winter day, you probably don't realize that your fireplace is one of the most inefficient heat sources you can possibly use. It literally sends your energy dollars right up the chimney along with volumes of warm air. A roaring fire can exhaust as much as 24,000 cubic feet of air per hour to the outside, which must be replaced by cold air coming into the house from the outside. Your heating system must warm up this air, which is then exhausted through your chimney. If you use your conventional fireplace while your central heating system is on, these tips can help reduce energy losses.

Fireplace Tips

• If you never use your fireplace, plug and seal the chimney flue.
• Keep your fireplace damper closed unless a fire is going. Keeping the damper open is like keeping a 48-inch window wide open during the winter; it allows warm air to go right up the chimney.
• When you use the fireplace, reduce heat loss by opening dampers in the bottom of the firebox (if provided) or open the nearest window slightly, approximately 1 inch, and close doors leading into the room. Lower the thermostat setting to between 50 and 55F.
• Install tempered glass doors and a heat air exchange system that blows warmed air back into the room.
• Check the seal on the flue damper and make it as snug as possible.
• Add caulking around the fireplace hearth.
• Use grates made of C-shaped metal tubes to draw cool room air into the fireplace and circulate warm air back into the room.

Air Conditioners

It might surprise you to know that buying a bigger room air conditioning unit won't necessarily make you feel more comfortable during the hot summer months. In fact, a room air conditioner that's too big for the area it is supposed to cool will perform less efficiently and less effectively than a smaller, properly sized unit. This is because room units work better if they run for relatively long periods of time than if they are continually, switching off and on. Longer run times allow air conditioners to maintain a more constant room temperature. Running longer also allows them to remove a larger amount of moisture from the air, which lowers humidity and, more importantly, makes you feel more comfortable.

Sizing is equally important for central air conditioning systems, which need to be sized by professionals. If you have a central air system in your home, set the fan to shut off at the same time as the cooling unit (compressor). In other words, don't use the system's central fan to provide circulation, but instead use circulating fans in individual rooms.

Cooling Tips

• Whole-house fans help cool your home by pulling cool air through the house and exhausting warm air through the attic. They are effective when operated at night and when the outside air is cooler than the inside.
• Set your thermostat as high as comfortably possible in the summer. The less difference between the indoor and outdoor temperatures, the lower your overall cooling bill will be.
• Don't set your thermostat at a colder setting than normal when you turn on your air conditioner. It will not cool your home any faster and could result in excessive cooling and, therefore, unnecessary expense.
• Set the fan speed on high except in very humid weather. When it's humid, set the fan speed on low. You'll get better cooling, and slower air movement through the cooling equipment allows it to remove more moisture from the air, resulting in greater comfort.
• Consider using an interior fan in conjunction with your window air conditioner to spread the cooled air more effectively through your home without greatly increasing your power use.
• Don't place lamps or TV sets near your air-conditioning thermostat. The thermostat senses heat from these appliances, which can cause the air conditioner to run longer than necessary.
• Plant trees or shrubs to shade air conditioning units but not to block the airflow. A unit operating in the shade uses as much as 10% less electricity than the same one operating in the sun.

Programmable Thermostats

You can save as much as 10% a year on your heating and cooling bills by simply turning your thermostat back 10% to 15% for 8 hours. You can do this automatically without sacrificing comfort by installing an automatic setback or programmable thermostat.

Using a programmable thermostat, you can adjust the times you turn on the heating or air-conditioning according to a pre-set schedule. As a result, you don't operate the equipment as much when you are asleep or when the house or part of the house is not occupied. (These thermostats are not meant to be used with heat pumps.) Programmable thermostats can store and repeat multiple daily settings (six or more temperature settings a day) that you can manually override without affecting the rest of the daily or weekly program

Ducts

Your home's duct system is one of the most important systems in your home, and may be wasting a lot of your energy dollars. It is a branching network of tubes in the walls, floors, and ceilings, carries the air from your home's furnace and central air conditioner to each room.

Unfortunately, many duct systems are poorly insulated or not insulated properly. Ducts that leak heated air into unheated spaces can add hundreds of dollars a year to your heating and cooling bills. Insulating ducts that are in unconditioned spaces is usually very cost effective. If you are buying a new duct system, consider one that comes with insulation already installed.

Sealing your ducts to prevent leaks is even more important if the ducts are located in an unconditioned area such as an attic or vented crawl space. If the supply ducts are leaking, heated or cooled air can be forced out unsealed joints and lost.

Although minor duct repairs are easy to accomplish, ducts in unconditioned spaces should be sealed and insulated by qualified professionals using the appropriate sealing materials. Here are a few simple tips to help with minor duct repairs.

Duct Tips

• Check your ducts for air leaks. First look for sections that should be joined but have separated and then look for obvious holes.
• If you use duct tape to repair and seal your ducts, look for tape with the Underwriters Laboratories (UL) logo to avoid tape that degrades, cracks, and loses its bond with age.
• Remember that insulating ducts in the basement will make the basement colder. If both the ducts and the basement walls are un-insulated, consider insulating the basement walls and the ducts.
• If your basement has been converted to a living area, install both supply and return registers in the basement rooms.
• Be sure a well-sealed vapor barrier exists on the outside of the insulation on cooling ducts to prevent moisture build up.
• Get a professional to help you insulate and repair all ducts.

Water Heating

Water heating is the third largest energy expense in your home. It typically accounts for about 14% of your utility bill.

There are four ways to cut your water heating bills: use less hot water, turn down the thermostat on your water heater, insulate your water heater, and buy a new, more efficient water heater. A family of four, each showering for 5 minutes a day, uses 700 gallons of water a week; this is enough for a 3-year supply of drinking water for one person. You can cut that amount in half simply by using low-flow showerheads and faucets.

Water Heating Tips

• Repair leaky faucets promptly; a leaky faucet wastes gallons of water in a short period.
• Insulate your electric hot water storage tank and pipes, but be careful not to cover the thermostat.
• Insulate your gas or oil hot water storage tank and pipes, but be careful not to cover the water heater's floor, top, thermostat, or burner compartment; when in doubt, get professional help.
• Install aerators in faucets and low flow showerheads.
• Buy a new water heater with a thick, insulating shell; while it may cost more initially than one without insulation, the energy savings will continue during the lifetime of the appliance.
• Although most water heaters last 10-15 years, it's best to start shopping for a new one if yours is more than 7 years old. Doing some research before your heater fails will enable you to select one that most appropriately meets your needs.
• Lower the thermostat on your water heater; water heaters at a setting of 115°F provide comfortable hot water for most uses.

Water Heater

• Insulate your water heater to save energy and money.
• Drain a quart of water from your water tank every 3 months to remove sediment that impedes heat transfer and lowers the efficiency of your heater.
• Take more showers than baths. Bathing uses the most hot water in the average household. You use 15­25 gallons of hot water for a bath, but less than 10 gallons during a 5-minute shower.
• If you heat with electricity and live in a warm and sunny climate, consider installing a solar water heater. The solar units are environmentally friendly and can now be installed on your roof to blend with the architecture of your house.

Solar Water Heaters

If you heat with electricity and you have an non-shaded, south-facing location (such as a roof) on your property, consider installing a solar water heater. Solar water heating systems are also good for the environment. Solar water heaters avoid the harmful greenhouse gas emissions associated with electricity production. During a 20 year period, one solar water heater can avoid over 50 tons of carbon dioxide emissions.

Windows

Windows can be one of your home's most attractive features. Windows provide views, daylight, ventilation, and solar heating in the winter. Unfortunately, they can also account for 10% to 25% of your heating bill. During the summer, sunny windows make your air conditioner work two to three times harder. If you live in the Sun Belt, look into new solar control spectrally selective windows, which can cut the cooling load by more than half.

If your home has single pane windows, as almost half of homes do, consider replacing them. New double pane windows with high performance glass (e.g., low-e or spectrally selective) are available on the market. In colder climates, select windows that are gas filled with low emissivity ( low-e) coatings on the glass to reduce heat loss. In warmer climates, select windows with spectrally selective coatings to reduce heat gain. If you are building a new home, you can offset some of the cost of installing more efficient windows because doing so allows you to buy smaller, less expensive heating and cooling equipment.

Cold-Climate Window Tips

• Install exterior or interior storm windows; storm windows can reduce your heat loss through the windows by 25% to 50%. Storm windows should have weather stripping at all moveable joints; be made of strong, durable materials; and have interlocking or overlapping joints. Low-e storm windows save even more energy.
• Install tight fitting, insulating window shades on windows that feel drafty after weatherizing.
• Close your curtains and shades at night; open them during the day.
• Keep windows on the south side of your house clean to maximize solar gain.

Warm-Climate Window Tips

• Install white window shades, drapes, or blinds to reflect heat away from the house.
• Close curtains on south and west facing windows.
• Install awnings on south and west facing windows.
• Apply sun control or other reflective films on south-facing windows to reduce solar gain.

Landscaping

Landscaping is a natural and beautiful way to keep your home more comfortable and reduce your energy bills. In addition to adding aesthetic value and environmental quality to your home, a well placed tree, shrub, or vine can deliver effective shade, act as a windbreak, and reduce overall energy bills.

Carefully positioned trees can save up to 25% of a typical household's energy for heating and cooling. Properly placed trees around the house, can save an average household between $100 and $250 in heating and cooling energy costs annually.

During the summer months, the most effective way to keep your home cool is to prevent the heat from building up in the first place. A primary source of heat buildup is sunlight absorbed by your home's roof, walls, and windows. Dark colored home exteriors absorb 70% to 90% of the radiant energy from the sun that strikes the home's surfaces. Some of this absorbed energy is then transferred into your home by way of conduction, resulting in heat gain inside the house. In contrast, light colored surfaces effectively reflect most of the heat away from your home. Landscaping can also help block and absorb the sun's energy to help decrease heat build up in your home by providing shade and evaporative cooling.

Lighting

Increasing your lighting efficiency is one of the fastest ways to decrease your energy bills. If you replace 25% of your lights in high use areas with fluorescents, you can save about 50% of your lighting energy bill.

Indoor Lighting

Use linear fluorescent and energy efficient compact fluorescent lamps (CFLs) in fixtures throughout your home to provide high quality and high efficiency lighting. Fluorescent lamps are much more efficient than incandescent bulbs and last 6 to 10 times longer.

Indoor Lighting Tips

• Turn off the lights in any room you're not using, or consider installing timers, photo cells, or occupancy sensors to reduce the amount of time your lights are on.
• Use task lighting; instead of brightly lighting an entire room, focus the light where you need it. For example, use fluorescent under cabinet lighting for kitchen sinks and countertops under cabinets.
• Consider three way lamps; they make it easier to keep lighting levels low when brighter light is not necessary.
• Use 4-foot fluorescent fixtures with reflective backing and electronic ballasts for your workroom, garage, and laundry areas.
• Consider using 4 watt mini fluorescent or electro luminescent night lights. Both lights are much more efficient than their incandescent counterparts. The luminescent lights are cool to the touch.
• Use CFLs in all the portable table and floor lamps in your home.
• For spot lighting, consider CFLs with reflectors. The lamps range in wattage from 13 watt to 32 watt and provide a very directed light using a reflector and lens system.
• Take advantage of daylight by using light colored, loose weave curtains on your windows to allow daylight to penetrate the room while preserving privacy. Also, decorate with lighter colors that reflect daylight.

Outdoor Lighting

Many homeowners use outdoor lighting for decoration and security. When shopping for outdoor lights, you will find a variety of products, from low-voltage pathway lighting to high sodium motion detector floodlights. Some stores also carry lights powered by small photovoltaic (PV) modules that convert sunlight directly into electricity; consider PV-powered lights for areas that are not close to an existing power supply line.

Outdoor Lighting Tips

• Use outdoor lights with a photocell unit or a timer so they will turn off during the day.
• Turn off decorative outdoor gas lamps; just eight gas lamps burning year round use as much natural gas as it takes to heat an average size home during an entire winter.
• Exterior lighting is one of the best places to use CFLs because of their long life. If you live in a cold climate, be sure to buy a lamp with a cold-weather ballast.

Appliances

Appliances account for about 20% of your household's energy consumption, with refrigerators and clothes dryers at the top of the consumption list.

When you're shopping for appliances, you can think of two price tags. The first one covers the purchase price - think of it as a down payment. The second price tag is the cost of operating the appliance during its lifetime. You'll be paying on that second price tag every month with your utility bill for the next 10 to 20 years, depending on the appliance. Refrigerators last an average of 20 years; room air conditioners and dishwashers, about 10 years each; clothes washers, about 14 years.

Dishwashers

Most of the energy used by a dishwasher is for water heating. The Energy Guide label estimates how much power is needed per year to run the appliance and to heat the water based on the yearly cost of gas and electric water heating.

Dishwasher Tips

• Check the manual that came with your dishwasher for the manufacturer's recommendations on water temperature; many have internal heating elements that allow you to set the water heater to a lower temperature.
• Scrape, don't rinse, off large food pieces and bones. Soaking or prewashing is generally only recommended in cases of burned on or dried on food.
• Be sure your dishwasher is full, but not overloaded.
• Don't use the "rinse hold" on your machine for just a few soiled dishes. It uses 3 to 7 gallons of hot water each time you use it.
• Let your dishes air dry; if you don't have an automatic air dry switch, turn off the control knob after the final rinse and prop the door open a little so the dishes will dry faster.
• Remember that dishwashers use less water than washing dishes by hand, about 6 gallons less per load; dishwashers also use hotter water than you would use if you were washing the dishes by hand, so they can do a better job of killing germs.

Refrigerators

Refrigerator Choices

Refrigerators with the freezer on top are more efficient than those with freezers on the side.

The Energy Guide label on new refrigerators will tell you how much electricity in kilowatt hours (kWh) a particular model uses in one year. The smaller the number, the less energy the refrigerator uses and the less it will cost you to operate.

Refrigerator/Freezer Energy Tips

• Look for a refrigerator with automatic moisture control. Models with this feature have been engineered to prevent moisture accumulation on the cabinet exterior without the addition of a heater. This is not the same thing as an "anti sweat" heater. Models with an anti-sweat heater will consume 5% to 10% more energy than models without this feature.
• Don't keep your refrigerator or freezer too cold. Recommended temperatures are 37° to 40°F for the fresh food compartment of the refrigerator and 5°F for the freezer section. If you have a separate freezer for long term storage, it should be kept at 0°F.
• To check refrigerator temperature, place an appliance thermometer in a glass of water in the center of the refrigerator. Read it after 24 hours. To check the freezer temperature, place a thermometer between frozen packages. Read it after 24 hours.
• Regularly defrost manual defrost refrigerators and freezers; frost buildup increases the amount of energy needed to keep the motor running. Don't allow frost to build up more than one quarter of an inch.
• Make sure your refrigerator door seals are airtight. Test them by closing the door over a piece of paper or a dollar bill so it is half in and half out of the refrigerator. If you can pull the paper or bill out easily, the latch may need adjustment or the seal may need replacing.
• Cover liquids and wrap foods stored in the refrigerator. Uncovered foods release moisture and make the compressor work harder.
• Move your refrigerator out from the wall and vacuum its condenser coils once a year unless you have a no clean condenser model. Your refrigerator will run for shorter periods with clean coils.

Other Energy-Saving Kitchen Tips

• Be sure to place the faucet lever on the kitchen sink in the cold position when using small amounts of water; placing the lever in the hot position uses energy to heat the water even though it never reaches the faucet.
• If you need to purchase a gas oven or range, look for one with an automatic, electric ignition system. An electric ignition saves gas - typically 41% in the oven and 53% on the top burners - because a pilot light is not burning continuously.
• In gas appliances, look for blue flames; yellow flames indicate the gas is burning inefficiently and an adjustment may be needed.
• Keep range top burners and reflectors clean; they will reflect the heat better, and you will save energy.
• Use a covered kettle or pan to boil water; it's faster and it uses less energy.
• Match the size of the pan to the heating element.
• If you cook with electricity, turn the stovetop burners off several minutes before the allotted cooking time. The heating element will stay hot long enough to finish the cooking without using more electricity. The same principle applies to oven cooking.
• Use small electric pans or toaster ovens for small meals rather than your large stove or oven. A toaster oven uses a third to half as much energy as a full-sized oven.
• Use pressure cookers and microwave ovens whenever it is convenient to do so. They can save energy by significantly reducing cooking time.

Laundry

About 80% to 85% of the energy used for washing clothes is for heating the water. There are two ways to reduce the amount of energy used for washing clothes - use less water and use cooler water. Unless you're dealing with oily stains, the warm or cold water setting on your machine will generally do a good job of cleaning your clothes. Switching your temperature setting from hot to warm can cut a load's energy use in half.

When shopping for a new washer, look for a front loading (horizontal-axis) machine. This machine may cost more to buy but uses about a third of the energy and less water than a top loading machine. With a front loader, you'll also save more on clothes drying, because they remove more water from your clothes during the spin cycle.

When shopping for a new clothes dryer, look for one with a moisture sensor that automatically shuts off the machine when your clothes are dry. Not only will this save energy, it will save wear and tear on your clothes caused by over drying. Keep in mind that gas dryers are less expensive to operate than electric dryers. The cost of drying a typical load of laundry in an electric dryer is 30 to 40 cents compared to 15 to 25 cents in a gas dryer.

Laundry Tips

• Wash your clothes in cold water using cold water detergents whenever possible.
• Wash and dry full loads. If you are washing a small load, use the appropriate water-level setting.
• Dry towels and heavier cottons in a separate load from lighter weight clothes.
• Don't over dry your clothes. If your machine has a moisture sensor, use it.
• Clean the lint filter in the dryer after every load to improve air circulation.
• Use the cool down cycle to allow the clothes to finish drying with the residual heat in the dryer.

Top>>

27 Tips You Should Know To Get Your Home Sold Fast and For Top Dollar

".....you have to sell your present home at exactly the right time in order to avoid either the financial burden of owning two homes or, just as bad, the dilemma of having no place to live during the gap between closings."

Because your home may well be your largest asset, selling it is probably one of the most important decisions you will make in your life. To better understand the homeselling process, a guide has been prepared from current industry insider reports. Through these 27 tips you will discover how to protect and capitalize on your most important investment, reduce stress, be in control of your situation, and make the most profit possible.

1. Understand Why You Are Selling Your Home

Your motivation to sell is the determining factor as to how you will approach the process. It affects everything from what you set your asking price at to how much time, money and effort you're willing to invest in order to prepare your home for sale. For example, if your goal is for a quick sale, this would determine one approach. If you want to maximize your profit, the sales process might take longer thus determining a different approach.

2. Keep the Reason(s) You are Selling to Yourself

The reason(s) you are selling your home will affect the way you negotiate its sale. By keeping this to yourself you don't provide ammunition to your prospective buyers. For example, should they learn that you must move quickly, you could be placed at a disadvantage in the negotiation process. When asked, simply say that your housing needs have changed. Remember, the reason( s) you are selling is only for you to know .

3. Before Setting a Price - Do Your Homework

When you set your price, you make buyers aware of the absolute maximum they have to pay for your home. As a seller, you will want to get a selling price as close to the list price as possible. If you start out by pricing too high you run the risk of not being taken seriously by buyers and their agents and pricing too low can result in selling for much less than you were hoping for.

Setting Your Home's Sale Price

If You Live in a Subdivision - If your home is comprised of similar or identical floor plans, built in the same period, simply look at recent sales in your neighborhood subdivision to give you a good idea of what your home is worth.

If You Live in An Older Neighborhood - As neighborhoods change over time each home may be different in minor or substantial ways. Because of this you will probably find that there aren't many homes truly comparable to your own. In this case you may want to consider seeking a Realtor ® to help you with the pricing process.

If You Decide to Sell On Your Own - A good way to establish a value is to look at homes that have sold in your neighborhood within the past 6 months, including those now on the market. This is how prospective buyers will assess the worth of your home. Also a trip to City Hall can provide you with home sale information in its public records, for most communities.

4. Do Some "Home Shopping" Yourself

The best way to learn about your competition and discover what turns buyers off is to check out other open houses. Note floor plans, condition, appearance, size of lot, location and other features. Particularly note, not only the asking prices but what they are actually selling for. Remember, if you're serious about getting your home sold fast, don't price it higher than your neighbor's.

5. When Getting an Appraisal is a Benefit

Sometimes a good appraisal can be a benefit in marketing your home. Getting an appraisal is a good way to let prospective buyers know that your home can be financed. However, an appraisal does cost money, has a limited life, and there's no guarantee you'll like the figure you hear.

6. Tax Assessments - What They Really Mean

Some people think that tax assessments are a way of evaluating a home. The difficulty here is that assessments are based on a number of criteria that may not be related to property values, so they may not necessarily reflect your home's true value.

7. Deciding Upon a Realtor ®

According to the National Association of Realtors, nearly two-thirds of the people surveyed who sell their own homes say they wouldn't do it again themselves. Primary reasons included setting a price, marketing handicaps, liability concerns, and time constraints. When deciding upon a Realtor ® , consider two or three. Be as wary of quotes that are too low as those that are too high.

All Realtors ® are not the same! A professional Realtor ® knows the market and has information on past sales, current listings, a marketing plan, and will provide their background and references. Evaluate each candidate carefully on the basis of their experience, qualifications, enthusiasm and personality. Be sure you choose someone that you trust and feel confident that they will do a good job on your behalf.

If you choose to sell on your own, you can still talk to a Realtor ® . Many are more than willing to help do-it-your-selfers with paperwork, contracts, etc. and should problems arise, you now have someone you can readily call upon.

8. Ensure You Have Room to Negotiate

Before settling on your asking price make sure you leave yourself enough room in which to bargain. For example, set your lowest and highest selling price. Then check your priorities to know if you'll price high to maximize your profit or price closer to market value if you want sell quickly.

9. Appearances Do Matter - Make them Count!

Appearance is so critical that it would be unwise to ignore this when selling your home. The look and "feel" of your home will generate a greater emotional response than any other factor. Prospective buyers react to what they see, hear, feel, and smell even though you may have priced your home to sell.

10. Invite the Honest Opinions of Others

The biggest mistake you can make at this point is to rely solely on your own judgment. Don't be shy about seeking the honest opinions of others. You need to be objective about your home's good points as well as bad. Fortunately, your Realtor ® will be unabashed about discussing what should be done to make your home more marketable.

11. Get it Spic n' Span Clean and Fix Everything, Even If It Seems Insignificant

Scrub, scour, tidy up, straighten, get rid of the clutter, declare war on dust, repair squeaks, the light switch that doesn't work, and the tiny crack in the bathroom mirror because these can be deal-killers and you'll never know what turns buyers off. Remember, you're not just competing with other resale homes, but brand-new ones as well.

12. Allow Prospective Buyers to Visualize Themselves in Your Home

The last thing you want prospective buyers to feel when viewing your home is that they may be intruding into someone's life. Avoid clutter such as too many knick-knacks, etc. Decorate in neutral colors, like white or beige and place a few carefully chosen items to add warmth and character. You can enhance the attractiveness of your home with a well-placed vase of flowers or potpourri in the bathroom. Home-decor magazines are great for tips.

13. Deal Killer Odors - Must Go!

You may not realize but odd smells like traces of food, pets and smoking odors can kill deals quickly. If prospective buyers know you have a dog, or that you smoke, they'll start being aware of odors and seeing stains that may not even exist. Don't leave any clues.

14. Be a Smart Seller - Disclose Everything

Smart sellers are proactive in disclosing all known defects to their buyers in writing. This can reduce liability and prevent law suits later on.

15. It's Better With More Prospects

When you maximize your home's marketability, you will most likely attract more than one prospective buyer. It is much better to have several buyers because they will compete with each other; a single buyer will end up competing with you.

16. Keep Emotions in Check During Negotiations

Let go of the emotion you've invested in your home. Be detached, using a business-like manner in your negotiations. You'll definitely have an advantage over those who get caught up emotionally in the situation.

17. Learn Why Your Buyer is Motivated

The better you know your buyers the better you can use the negotiation process to your advantage. This allows you to control the pace and duration of the process.

As a rule, buyers are looking to purchase the best affordable property for the least amount of money. Knowing what motivates them enables you to negotiate more effectively. For example, does your buyer need to move quickly. Armed with this information you are in a better position to bargain.

18. What the Buyer Can Really Pay

As soon as possible, try to learn the amount of mortgage the buyer is qualified to carry and how much his/her down payment is. If their offer is low, ask their Realtor ® about the buyer's ability to pay what your home is worth.

19. When the Buyer Would Like to Close

Quite often, when buyers would "like" to close is when they need to close. Knowledge of their deadlines for completing negotiations again creates a negotiating advantage for you.

20. Never Sign a Deal on Your Next Home Until You Sell Your Current Home

Beware of closing on your new home while you're still making mortgage payments on the old one or you might end up becoming a seller who is eager (even desperate) for the first deal that comes along.

21. Moving Out Before You Sell Can Put You at a Disadvantage

It has been proven that it's more difficult to sell a home that is vacant because it becomes forlorn looking, forgotten, no longer an appealing sight. Buyers start getting the message that you have another home and are probably motivated to sell. This could cost you thousands of dollars.

22. Deadlines Create A Serious Disadvantage

Don't try to sell by a certain date. This adds unnecessary pressure and is a serious disadvantage in negotiations.

23. A Low Offer - Don't Take It Personally

Invariably the initial offer is below what both you and the buyer knows he'll pay for your property. Don't be upset, evaluate the offer objectively. Ensure it spells out the offering price, sufficient deposit, amount of down payment, mortgage amount, a closing date and any special requests. This can simply provide a starting point from which you can negotiate.

24. Turn That Low Offer Around

You can counter a low offer or even an offer that's just under your asking price. This lets the buyer know that the first offer isn't seen as being a serious one. Now you'll be negotiating only with buyers with serious offers.

25. Maybe the Buyer's Not Qualified

If you feel an offer is inadequate, now is the time to make sure the buyer is qualified to carry the size of mortgage the deal requires. Inquire how they arrived at their figure, and suggest they compare your price to the prices of homes for sale in your neighborhood.

26. Ensure the Contract is Complete

To avoid problems, ensure that all terms, costs and responsibilities are spelled out in the contract of sale. It should include such items as the date it was made, names of parties involved, address of property being sold, purchase price, where deposit monies will be held, date for loan approval, date and place of closing, type of deed, including any contingencies that remain to be settled and what personal property is included (or not) in the sale.

27. Resist Deviating From the Contract

For example, if the buyer requests a move-in prior to closing, just say no. That you've been advised against it. Now is not the time to take any chances of the deal falling through.

Top>>

Get An Extra Hour Out Of Every Day

How can you get an extra hour from each day? This is a basic challenge for all of us. We've come up with many practical ways to secure one more precious hour from each day. (Remember that each of these tips is probably adaptable to your particular situation.) Here they are. I hope you'll find them helpful an useful to you...

1. Make up and follow a detailed, daily schedule.

2. Get up earlier.

3. Do less passive reading, TV watching and the like.

4. Avoid allowing others to waste your time.

5. If you commute to work, use the time to study or plan.

6. Organize your work; do it systematically.

7. Make creative use of lunchtime.

8. Delegate authority if possible.

9. Spend less time on unimportant phone calls.

10. Think first; then do the job.

11. Do instead of dream.

12. Work hardest when you're mentally most alert.

13. Eliminate activities which make little contribution to the best results for your life.

14. Always do the toughest jobs first.

15. Before each major act, ask: Is this REALLY necessary?

16. Choose interesting and constructive literature for spare-moment reading.

17. Learn how to sleep. Sleep soundly, then work refreshed.

18. Skip desserts.

19. Stop smoking.

20. Write notes or letters while waiting for others.

21. Always carry an envelope with paper in it, stamps and a few postcards.

22. Combine tasks which are done in the same area.

23. Be prompt for all appointments.

24. Lay out your clothes the night before.

25. Relax. Ready yourself for the important jobs in life.

26. Concentrate on the specific task you're doing.

27. Make constructive use of those five- or ten-minute waiting periods. Carry with you magazine article clippings on helpful subjects.

28. Always carry a pencil and paper to capture important-to-you ideas.

29. Learn to do other "unnecessary things" while watching TV or listening to the radio.

30. Call on specialists to accomplish work you cannot do efficiently.

31. Learn to read more rapidly.

32. Nap an hour after dinner. Then take a shower. Begin the evening hours relaxed and refreshed.

33. Avoid making a "production" out of small tasks.

34. Avoid interruptions.

35. Tackle only one job at a time.

36. Search out job short-cuts.

37. Know your limitations.

38. Work to your top capacity.

Top>>

5 Things You Must Know about Recent Mortgage Loan Changes

"....Insider Secrets that can make owning your Dream Home possible..."

1. Increased Ability To Finance Your Closing Costs

   You can now finance up to 100% of your closing costs thanks to recent changes in Federal Housing Administration (FHA) guidelines, compared to the old limit of 57%.  This is very good news for the first time home buyer who typically has less cash available at the time of closing.

2. Increased FHA Limits

   There FHA loan amount maximums have increased, which is particularly helpful for people living in high cost housing markets.  FHA 's mortgage limit is now tied to local housing costs.  The limit is now 95% of the median home price, or 75% of the Fannie Mae maximum loan amount, which ever is lower.  This is another avenue for the first time home buyer to achieve the dream of home ownership.

3. Increased Accessibility to Down Payment Assistance Programs

   With the rapid increase in home prices over recent years, more and more people are having the dream of home ownership ripped from their hands.  Typically one had to go through a rigorous process to qualify for a down payment assistance program.  Today, there are now programs which have very little hassle.  Ask your mortgage broker if they have access to such options.

4. Rapid Loan Approval

   One of the latest innovations in the mortgage industry is the advent of computerized loan approval.  These programs provide both rapid loan approval and more uniform loan approval practices.  This type of approval is done by scoring a borrower's credit worthiness which quantifies the risk they will default on the loan.  Does your mortgage broker use such a program?

5. Affordable Mortgages Which Don't Verify Income

   These loans are perfect for those people who are self employed, real estate investors, retired persons and anyone who doesn’t want to have to prove their income.  It is essential to have a good credit score in order to qualify for non income verified loan.

Top>>